I can’t access my Netgear orbi router; what do I do?

Orbi wifi systems are considered the most reliable products. There’s a possibility that you may get some error while accessing the Orbi login page. This blog covers all the tricks and tips that you can follow to troubleshoot the issue of Orbilogin.com not working.

Simple fixes to troubleshoot the Orbilogin.com not working error

Check power supply

First of all, check if the Orbi router is plugged into the power plug. You can receive the issue of Orbilogin.com not working if your router is not getting proper power. Also, make sure the Orbi satellite is attached to an electrical source and is powered on. You can identify this by checking the status of the power LED on the Orbi wifi router. If the LED light is solid green that means the router is getting enough power. 

Check cable connections

Now, you need to check that your end device such as a PC or mobile device is connected to the Orbi router network. Make sure that both the devices are connected either wirelessly or through a wired cable. 

In the wired connection, you have to connect the Ethernet wire from the PC to the LAN port on the Orbi router. If you want to use a wireless connection, then check the default WiFi credentials of the Orbi device on its product label at the back panel. Then try to connect to the Orbi network name by typing in the wireless password. 

Note: You should always use a wired cable rather than a wireless connection for a hassle-free Orbi setup process. 

Use the Orbi login IP address

Still, getting an error of orbilogin.com not working? If yes then make use of the default IP address of your Orbi wifi router to access the Netgear Orbi login page. 

If you don’t know about the IP address for your Orbi device, then you need to locate it first. For that, you have to login to the Orbi router’s web console. Type  Orbilogin.com in your browser’s address bar and log in with the admin details to open the basic homepage. Then head over to the Advanced settings and click on Router Information. You will find the default IP for your Orbi wireless router http://192.168.1.1 or http://10.0.0.1 under the Router Information. 

Update your browser

Next, check if Orbilogin.com is not cached in your browser. In that case, you need to close your current browser and use a different one to access the Netgear Orbi login page. Also, you can try deleting the cache, cookies, and browning history of your current browser or upgrade it to the latest version. Make sure to access the Orbi router’s web interface using an updated browser. 

Use a different client device

Make sure that your client device on which you are trying to set up your orbi wifi router is connected to the Orbi device. Check if all the cables connected to your client device are tight and secure. You can use a different device such as another PC, tablet, or mobile device to perform the Orbi login process. 

Power Cycle the router

If the above steps don’t fix the issue, then power cycle the Orbi router. Follow the tips below to do that:

• Firstly, unplug and turn off your modem.
• Secondly, turn off and unplug your Orbi router and satellite.
• Now, reconnect your modem and turn it on. Allow your modem to reboot.
• After a minute, connect your Orbi router and satellite.
• It takes two minutes for your Orbi devices to restart. Your network has been rebooted.

Reset the Orbi router

When you reset your Orbi WiFi system to factory default settings, you lose all the customized settings, including your network name (SSID) and password.

To restore your Orbi WiFi system to factory default settings, follow these steps:

• First, check that your Orbi device is turned on.
• Now, press and hold the Reset button with a paper clip or similar item until the Power LED on your Orbi device blinks amber.
• When you reset a wall-plug satellite, the ring LED becomes amber.
• Your Orbi device has been reset.

How to access the Netgear Orbi login page?

• The first step is to connect your PC to the Orbi wireless router via an Ethernet connection.
• Now, open any browser on your PC.
• Then, in the address area, put orbilogin.net or orbilogin.com. 
• When a login page displays, enter the Orbi device’s default admin credentials such as username and password. 
• Finally, click the Login button to access the Orbi setup page.

Conclusion

With the above troubleshooting tips, you would be able to fix the Orbilogin.com not working error. If you have any doubt or queries with the same, you can ask our technical expert team on the helpline number.